Red Lion Controls launched its IFMR Series signal conditioners that accept frequencies from .1 Hz to 25 KHz and provide outputs including over-speed, under-speed or zero-speed detection.
With the built-in single relay output, these signal conditioners can be set to trip anywhere from .1 Hz to 25 KHz. The series supports universal input, alarm latching and resetting.
Offset and hysteresis values can be incorporated into the trip setting to eliminate false outputs. Two separate input connections are available for external push-buttons are provided and override to the relay trip detection.
The override holds the relay in the release state as long as the input is connected. The other external input clears a latched trip condition when pulled.
The IFMR signal conditioners can be easily configured using a seven position DIP switch, rotary switch and/or push-button. The input circuitry is also DIP switch selectable for a variety of sources.
The unit operates in one of six user selectable output modes. The programmable minimum response time provides optimum response versus input filtering for any input frequency. The offset and hysteresis settings provide flexible adjustment of the relay trip and release points.
LED lights on the face are illuminated during normal operation to display the input and output status. These LEDs are also used to provide visual feedback during device configuration. The device is equipped with a universal mounting foot and can be mounted to either a top hat (EN 50 022) or a G profile (EN 50 035 – G32) DIN rail.
Red Lion Controls
20 Willow Springs Circle
York, PA 17406 USA
Tel: +1 (717) 767-6511
Fax: +1 (717) 764-0839
See our complete Company Profile on Thomasnet.com