Novotechnik offers its RFC-4800 Series magnetic angle sensors featuring J1939 interface, making them ideal for commercial and mobile vehicle automation applications.
These magnetic angle sensors deliver high immunity to interference, convenient cabling and diagnostic options and follow the comprehensive RFC-4800 series with a full 360 degrees rotation angle, angular positioning resolution of up to 14 bits, independent linearity of +/- 0.5%, and repeatability to 0.36 degrees.
With the sensor to magnet air gap tolerance of up to 5 mm and relatively un-critical alignment requirements, installation is straightforward. Measurements can equally be made through an air gap or through any non-ferromagnetic material.
The sensors are vibration rated up to 20 g (IEC 600658-2-6) and shock up to 50 g (IEC 68068-2-27). The sensors are available with a choice of IP67 or IP6K9K protection. They will operate in ambient temperature conditions between -40 °C and +105 °C.
The compact sensor is installed within a 50 mm diameter and a height of less than 14 mm with various magnet/position marker options or separate magnets for direct fitting to the customer’s shaft or measured component.
Novotechnik Messwertaufnehmer OHG
73760 Ostfildern (Ruit)
Tel: +49 711 / 44 89 – 0
Fax: +49 711 / 44 89 – 118