CONTA-CLIP announced its KDS-FP flange plate, a tool-free, click-and-push system for managing cable or tube entry on control cabinets. This cable flange plate can be used to manage cables and pneumatic and hydraulic tubes while providing IP66 ingress protection.
The number and diameters of the required openings can be easily adapted at any time without drilling, sawing or other machining.
First, a cavity with standard dimensions in the cabinet wall is fully and tightly sealed by screwing on the flange plate. Then, up to three plate segments can be broken off at predetermined breaking points as needed without the use of tools.
Each removed segment reveals a 40x110mm duct that can be further divided into up to ten frame openings by snapping frame inlays from the KDSClick series into place.
The inlays are available as plain partitions, T-pieces or cross and double cross form to allow for the required custom dimensioning of the frame openings.
The sealing elements, which feature a crinkle cut at the side, are placed around the wires, ensuring a tight seal and also strain relief.
After the wires are sheathed, the elements are inserted from the inside of the cabinet and pushed to the outside through the frame openings defined by the inlays.
CONTA-CLIP Verbindungstechnik GmbH
Tel: +49 (0) 52 57.98 33-0
Fax: +49 (0) 52 57.98 33-33